Polariod Border
Polariod Border
ClimateX
University of Oxford Logo
Scrabook Top Border
Log In

Blog posts in July 2008 by catherined

The house is starting to look quite cosy now as the insulation is being fixed on to the main walls of the house. A mesh is then fitted onto the outside of the insulation to provide a key for the render.

One of the challenges is fitting the fairly solid and rigid insulation around all the things on the walls. The outside light needed to be removed and the insulation fitted around the cable. The gas meter is on an outside wall so will need to be insulated around. The flue for the gas boiler needs to be extended to accommodate the extra depth of the insulation and then have the insulation fitted around it.


Blog post by catherined on July 09, 2008 at 2:23 p.m.
Tags: flueinsulationsolid walls 

No comments have been posted yet.

Post a comment

The brickwork below the damp-proof course has now been insulated with Foamglas and a membrane is being fitted on top to form a barrier between this and the rest of the insulation above.

Repairs have been made to the brickwork, an extra wooden frame has  been added around the window ready for the insulation and the large gaps between the windows and the wall, revealed when the render was removed, have been filled. I presume these gaps are from when the double glazing was fitted around 7 years ago,

 


Blog post by catherined on July 07, 2008 at 9:05 p.m.
Tags: damp proofingEcohouseinsulationsolid walls 

No comments have been posted yet.

Post a comment

While we wait for progress on the outside of our house here’s some info about our stove. Our wood-burning stove was installed earlier this year, in March (just before Easter).

Why burn wood?

Burning wood is carbon neutral as it gives out carbon dioxide that it absorbed when growing.

This is especially the case as we’re hoping to be able to run it from local waste wood – this would otherwise have been left to rot or burned on a bonfire so we’re releasing that CO2 for a  good use in heating our home instead of wasting it.

 

Waste wood

Our waste wood is made up of branches pruned/pollarded from local trees and (non-treated) packaging and off-cuts. A good example of this is that our new cooker was delivered in a protective pine framework. This has now been carefully saved to keep us warm in the winter (it’s currently living in the greenhouse!)

We also collected quite a few logs from the grounds of our church when they were pollarded which, together with the prunings from our rather overgrown garden, may see us through the winter.

Why have a stove?

The wood burner is extremely efficient. Burning wood in an open grate, as we did previously, is incredibly wasteful. Not only does around 80% of the heat disappear up the chimney when you’re using it, but other heat from the room (e.g. from the central heating) is sucked up the chimney too. Modern stoves should be over 70% efficient – meaning that 70% of the heat that they give out stays in the room.

Which stove?

We chose the Clearview Pioneer in the end. It wasn’t actually our first choice but as we’re not very knowledgeable about the installation of these sorts of things, we wanted to get a company that would both supply and install the stove. We also wanted a stove with low emissions (the particulate sort) that could be used in a smokeless zone.

http://www.clearviewstoves.com/pioneer400.htm

 

The result:

We’re really impressed with the stove. It feels really amazing to have a heat control on a fire. The special wheel restricts the air flow when you want the fire to burn more slowly. Also, it lights far more easily than an open fire because the draught from the chimney is being channelled up through the grate.

This little stove can just about heat our whole house – the layout of our house make this possible as most of the rooms just lead into one another and when the room gets really hot, we can open the door to send the heat straight upstairs. We did a 40 hour energy blackout at Easter and managed to survive without the central heating. The second day it seemed much harder – we wondered why until we looked outside and saw the snow. It probably wouldn’t have been a problem even then if we had had a reasonable stock of dry wood!

Next winter should be easier as our insulation will keep the house cosier for longer with less fuel.

. . . . . .

 

We’re not getting rid of the gas central heating. We’re planning to use it in the mornings (timers are very useful); sometimes in the evenings (especially when we’re really busy/tired/unwell). I’ll report back on how the first winter goes…

 

But this still leaves one problem – what shall we do with the old garden incinerator?

Perhaps we can use it to grow potatoes now???!!

 


Blog post by catherined on July 07, 2008 at 2:24 p.m.
Tags: Ecohouseinsulationstovesustainable energywastewood fuel 

Posted by stevaxx 1 year, 7 months ago:

As a heating engineer I found your article really interesting.

I'm please to see you are still going to use your central heating system.

Good luck with your project.

Central Heating Sheffield

Read more comments